SNAP-IT™ is a simple snap-together mould that lets you pour clean, professional concrete garden edging yourself.
✓ Easy DIY setup ✓ Create straights, curves and corners ✓ Clean, professional concrete finish
1. Plan it.
Shop a pre-made kit or use our calculator to plan your ideal edging layout.
2. SNAP-IT™.
Dig a shallow trench, snap the pieces into shape, then lay reinforcing steel on top.
3. Pour it.
Pour the concrete. After about 30 minutes, finish with a trowel, brush or imprint roller.
4. Job done.
After 48 hours, trim the edges with a sturdy knife, backfill with soil or stones, and admire your work.
Choose your project below and we’ll show you the best SNAP-IT™ kit
Still not sure?
Use our custom SNAP-IT™ Builder to get the edges you need.
– Eddie, Bluff Hill
★★★★★
“I can definitely see the benefits of using this product. It will drastically reduce the labour time required to lay similar edging and thus save time and money. I have already shown your samples of Snap-it to three of my current clients who are extremely impressed with the results. I feel confident including Snap-it Quick Edge in my future landscape designs.”
★★★★★
“I am writing to tell you how thrilled I am with my ‘Snap It’ garden edging. It just looks sensational and is so easy to keep and run the lawn mower around. Family and friends have all passed very positive comments. It has changed my life as far as care and energy spent trying to keep that area of my garden looking great. It is a fantastic product and you and the team have done an excellent job.”
★★★★★
“It’s just easy. I got my curve where I wanted it, and it’s just done.”
No special tools or tradies needed, just a few simple steps and you're done.
Straight, curved, or angled: SNAP-IT™ Quick Edge adapts to suit your space and style and pieces can be easily cut to size for a fully custom design.
Get a clean, long-lasting concrete edge that looks like it was built by a professional.
You’ll need a spade, snips (for trimming components), steel rebar (included in most kits), a hammer or mallet, and a SNAP-IT Finishing Trowel (included in most kits or sold separately). A string line or chalk is helpful for layout.
Use the SNAP-IT Builder to plan your layout and calculate how many straights, curves, and elbows you’ll need. Or choose a pre-made kit that suits your project size and shape.
Yes, all units can be trimmed with snips for smaller spaces. Always leave a 10–20mm overlap between pieces for strength and a snug seal.
SNAP-IT edging units are made from, recycled and virgin thermoformed High Impact Polystyrene plastic designed for strength, stability, and ease of use. The forms are non-biodegradable and the bottom section of the moulding is intended to be left in place as part of the finished concrete edge.
While not reusable, SNAP-IT pieces can be recycled through standard household collection systems in New Zealand, provided they are fully cleaned of any concrete residue first. Check with your local council for specific recycling requirements.
4.9/5 · 500+ NZ homeowners
The snap-together sacrificial edging system that gives you crisp, professional concrete lawn borders — no timber, no rot, no fuss.
✓ Free shipping over $150 · ✓ 5-year warranty · ✓ NZ stock
Measure your garden border in metres. Use our SNAP-IT™ Builder to find out exactly how many units you need.
Snap the sections together. They lock in seconds — no specialist tools, no tradie, no experience needed.
Pour your concrete, allow to cure, backfill, and you’re finished. Professional crisp edges that last for years.
Crisp, straight edges that frame your lawn and instantly lift the look of your whole outdoor space.
Average for full install
Product lifespan
NZ installs
Timber rots and warps. SNAP-IT™ stays sharp for decades.
Not sure how much you need? Measure the total length of the borders you want to edge, then pick the kit below.
Everything you need to edge a standard garden bed or small project.
The most popular choice for tree surrounds
Flat-rate shipping: North Island $40 • South Island $65
4.9/5 from 500+ verified reviews
“Thank you for the demonstration of your Snap-it Quick Edge garden edging. I can definitely see the benefits of using this product. It will drastically reduce the labour time required to lay similar edging and thus save time and money… Read more
“I am writing to tell you how thrilled I am with my ‘Snap It’ garden edging. Now that I have completed the back filling and the grass I planted has grown, it just looks sensational… Read more
You’ll need a spade, snips (for trimming components), steel rebar (included in most kits), a hammer or mallet, and a SNAP-IT Finishing Trowel (included in most kits or sold separately). A string line or chalk is helpful for layout.
Use the SNAP-IT Builder to plan your layout and calculate how many straights, curves, and elbows you’ll need. Or choose a pre-made kit that suits your project size and shape.
Yes, all units can be trimmed with snips for smaller spaces. Always leave a 10–20mm overlap between pieces for strength and a snug seal.
SNAP-IT edging units are made from, recycled and virgin thermoformed High Impact Polystyrene plastic designed for strength, stability, and ease of use. The forms are non-biodegradable and the bottom section of the moulding is intended to be left in place as part of the finished concrete edge.
While not reusable, SNAP-IT pieces can be recycled through standard household collection systems in New Zealand, provided they are fully cleaned of any concrete residue first. Check with your local council for specific recycling requirements.
